📋 Key Takeaways
- 1.What it means: The system pressure has dropped below minimum. One of the most common Vaillant fault codes.
- 2.What to do: Repressurise to 1–1.5 bar using the filling loop, then press reset.
- 3.DIY or engineer? You can try one reset after addressing the cause. If it returns, call a Gas Safe engineer.
🔒Written by a Gas Safe registered engineer
Vaillant — ecoTEC Plus
Fault Code F.22: Low water pressure
The system pressure has dropped below minimum. One of the most common Vaillant fault codes.
What to do: Repressurise to 1–1.5 bar using the filling loop, then press reset.
🔄 You can try resetting
This fault code can often be cleared by addressing the underlying issue (e.g. repressurising) and pressing the reset button once. If the fault returns after one reset, do not keep resetting — call a Gas Safe engineer to investigate.
💷🔥
How much will a repair cost?
UK price guide for 30+ boiler & plumbing jobs
Get a new boiler quote
See what a replacement should cost you
🔐
Full Technical Repair Guide — Pro Members
The component-level repair guide for this fault code is available to Pro subscribers — designed for Gas Safe engineers and heating professionals.
- ✓Exact components to test and replace
- ✓Pressure and temperature diagnostic values
- ✓Common misdiagnosis warnings
- ✓Printable fault diagnosis sheet
- ✓Direct links to genuine spare parts
📞 Get Help Directly
📄
Download ↗Vaillant ecoTEC Plus — Official Manual
Installation & user guide from the manufacturer
Gas Emergency
🚨 0800 111 999
Free, 24/7 — if you smell gas
Phone numbers provided in good faith — verify on the manufacturer's official website. PlumbingAdvice.co.uk is not affiliated with any boiler manufacturer.
Was this guide helpful?